ABG MESH Enhanced

Home › SilverNet - Outdoor Wireless Network Equipment and Devices, Mobile Hotspot, WISP/ISP, CCTV Monitor Transmission › Dual Frequency Wireless Mesh Networks › ABG MESH Enhanced - Outdoor Wireless MESH

Product overview

ABG MESH Enhanced - Outdoor Wireless MESH

More Images ›
  • Dual 802.11a/b/g Radios
  • AP, Bridge, and Gateway Modes
  • MESH Self-Healing, Self Forming, Self-Configuring
  • Temperature Control Module (-30 to 70 Celsius)
  • 802.1Q VLAN, Layer 2 Isolation, Multiple SSID
  • WMS utility, Rogue AP Detection, Client Load Balancing

The ABG MESH Enhanced is the latest addition to the AirLive WISP solution family.  It is our outdoor AP featuring the latest MESH outdoor technology.  The hardware features 2 Dual Band radios and Temperature Control Module that allows operation from -30 to 70 degree Celsius.  In addition, the software features such as WMS utility, Rogue AP Detection, and Client load balancing provide better security and control for administrators.  Comparing to our ABG MESH, ABG MESH Enhanced adds; Gateway mode, Multiple SSID, and VLAN functions.  The ABG MESH Enhanced adds significant improvement for performance and uptime for your WISP network. 

To see how Mesh works click here

DUAL RADIO DUAL BAND
Inside the ABG MESH Enhanced is a high performance Intel Xscale Processor working with 2 Dual Band 802.11a/b/g RF modules.  One RF radio is set to AP mode while the other radio is set to bridge mode, each radio have their own set of antenna connectors.  This means you can choose to let the AP provide service in 2.4GHz or 5GHz spectrum, while the bridge radios maintain links to the remote MESH network.

TEMPERATURE CONTROL MODULE
What good does an advanced outdoor AP do if it doesn't stand up to the temperature and environment challenge?  Besides the water-proof IP-67 certification, the ABG MESH Enhanced uses the Thermal Electric Active Cooler from Marlow Industries that enable the unit to operate from -30 degree to 70 degree Celsius temperature.  This means year-round operation for your WISP network.

ELECTRIC ACTIVE COOLER

ADVANCE SOFTWARE FEATURE
The ABG MESH Enhanced features the following software functions for extra management and security need

  • Layer2 Client Isolation:  Separate your wireless client from see each other.
  • 802.1Q VLAN:  Divide your network into separate wireless VLAN networks
  • Multiple SSID:  You can have more than one SSID in AP mode.  Each SSID can be a separate wireless VLAN
  • Gateway mode:  Turn your AP mode into a router mode.  Gateway functions such as DMZ, content filtering, IP filtering, and virtual server are inlucded
  • Rogue AP Detection:  When an authorized AP tries to join the MESH network, the MESH network will block such attempts and notify the administrator.
  • WMS Utility:  The ABG MESH Enhanced includes a WMS utility to let administrator manage and monitor all the APs in the MESH network
  • Client Load Balancing:  When there is too many clients in one station, the station will reject connection to redirect the client to other APs.
  • ACK Timeout Adjustment:  This feature let your 802.11a and 802.11g network to maintain its speed over long distance.  The ABG MESH Enhanced defines the ACK timeout by distance.  Therefore, you don't have to second guess the correct value to enter.

The MESH network will improve the uptime and performance of your WISP network.  It is a perfect choice for WISP backbone deployment.

* The ABG MESH Enhanced features 2 RF radios.  Each radio can operate in 2.4Ghz or 5GHz, but not both bands at the same time.  However, you can have one radio operate in 2.4GHz and the other operates in 5GHz.

** This Device has no NAT router function.  The WAN port on this device functions like LAN port.

Technical specifications

Specification
Hardware

CPU: Intel IXP-425, 533Mhz

Flash: 8 Megabytes

DRAM: 32 Megabytes

Connectors

 1 LAN Port (10/100 Mbps)

 1 Ethernet Configuration Port(10/100Mbps)

 2 x N-Type Antenna Connectors for AP-Mode

 1 x N-Type Antenna Connector for Bridge-Mode

Wireless

2 x 802.11a/b/g Radios

Atheros CM-9 Modules 

Turbo A, Supper G, 802.11a, 802.11g, 802.11b compatible

TPC and DFS in 802.11a mode

5GHz or 2.4GHz frequency spectrum

AP and Bridge/Repeater mode

Adjustable TX Power

RF Output Power

802.11a

17dB @ 6Mbps

13dB @ 54Mbps 

802.11g

18dB @ 6Mbps

15dB @ 54Mbps

802.11b

18dB
RF Receiver Sensitivity

802.11a

-88dB @ 6Mbps

-71dB @ 54Mbps

802.11g

-90dB @ 6Mbps

-74dB @ 54Mbps

802.11b

-90dB @ 6Mbps

-74dB @ 54Mbps

Power over Ethernet

802.3af Compliant

Up to 100 meter with optional cable 

30 meter POE cable included 

DC Injector included 

Software Features

SNMP Agent

HTTPS and Web management

Layer 2 Client Isolation

Auto Bridge Mode for up to 40 Nodes

Bridge Priority for Auto Bridge mode

MESH Self-forming and Self-Configuration

ACK Timeout Adjustment in Distance

Fixed or Auto Wireless Channel Selection

MESH Bridge Site Map

Signal Strength and Wireless MAC Monitoring

MAC Address Filtering

Rogue AP Detection with Email notification

Wireless Client Load Balancing

Layer 2 Isolation

Enable/Disable SSID Broadcast

Management 

HTTPS Web management

SNMP agent

WMS central management utility included

Auto Bridge Mode for up to 40 Nodes

Encryptions

64/128/152-bit WEP

WPA and WPA-PSK 

WPA2, 802.11i

AES CCMP 

Physical Specification

IP-67 Certification

Thermal Electric Active Cooler

Dimensions:235 mm x 210 mm x 76 mm

Weight: 2.5kg (main unit)

Operating Temperature : -30°C ~ 70 °C

Storage Temperature: -40 °C ~ 80 °C

Operating Humidity:0~95% non-condensing

Accessories

Mounting Kits

2 x 5dBi antennas

30 meter water-proof POE cable

Power Adapter and POE DC Injector

1.5 meter antenna cable

CD

Back to top ˆˆ